C7500: VIP4-80 if possible, or VIP2-50 for OC3 rates; no asic support of QoS features,
IOS 12.1(5)T or higher for class-based shaping on any interface;
Cisco IOS version 12.0(3)T or higher; IOS 12.1(5)T for class based
shaping on any interface;
Cisco 7500: VIP2-50, all PA-A3 versions (only one PA-A3 per VIP2-50).
Cisco 7200: NPE200 or higher, all PA-A3 versions.
GSR:
Engine 0: (Quad STM-1 POS/ATM, single STM-4 POS/ATM and others)
Engine 1: (single GEth, 8 FEth, DPT 2XSTM-4)
Engine 0 and 1 support CAR in sw; MDRR: in Engine 0 in sw
Engine 2: STM-16, Enhanced Quad OC-12/STM-4 Packet-over-SONET/SDH
- 4 ports, MPLS-capable -, 8 and 16 STM-1, 3 GEth, Enhanced
OC-48/STM-16 Packet-over-SONET/SDH.
no support of CAR, PIRC in hw instead; WRED in hw; MDRR in hw (See also
Quad OC-12/STM-4;
Rel. Notes 12.0 S
)
Engine 4: speed greater than 2.5 Gbps,
CAR, WRED, MDRR in hw
Line Card Distributed Forwarding Card (DFC)- ??
(see DFC)
Distributed Forwarding Daughter card must be installed on any line card
Multilayer Switch Feature Card (MSFC) 2 -
for Supervisor engine - plus PFC2 (see
MSFC2,
QoS features for Cat 6000)
Note 1: OS: some features are available only if we run IOS and not
CatOs (verify this);
Note 2: new line cards for queuing, WRED, per-class shaping at line
spped.